The Zone Monitoring System is a system for logging the rounds of employees in a varity of situations such as security guards patrolling property, technicians monitoring climate-controlled environments, etc. it helps ensure that the employee makes their appointed rounds at the correct intervals and can offer a record for managerial, legal or insurance reasons.
With Zone Monitoring System, you use your computer, mobile tablet or smart phone to keep on monitor your assets and important sites, no matter where you are.
Step 1 - Identify the Guard's Fingerprint
Step 2 - Reading the Check Point
Step 3 - Upload Data from Handheld Reader
Step 4 - Report checking on PC, Laptop, Mobile Tablet or Smart Phone
Fingerprint RFID Guard Reader WM-5000X1 Specification | |
Dimension | 160mm × 50mm × 34mm |
Weight | 314g |
IP Rating | IP67 |
Reading Mode | RFID 125 KHz Reading distance 3cm – 5cm |
Communication | Pogo pin USB(Drive-Free), 15000 record uploading/min |
Operating Temperature | -40℃~+85℃ |
Battery | 3.7V/2000mAh rechargeable lithium batteries Maximum Time To Full Charge (20% Efficiency Loss) : 1 ~ 2 Hours |
Batter Life | 1. Read 500 record a day, turn on the flashlight for 2 hours, for 9 days using. 2. Read 500 record a day, for 45 days.16 days after low power. 3. After low power, for 16 days using. |
Storage Capacity | 16Mbit flash, 60,000 pieces |
Prompt | Vibration +OLED Display + Voice. |
Tag ID number | 10 bit hexadecimal in the reader (5bytes). |
Building -3, Room-7, Myanmar Info Tech, Hlaing Township.
Tel: 09 456 622 277, 09 420 318 050
www.myanmarparama.com